Table of Contents
Advertisement
Table 11. System setup options—Passwords menu (continued)
Passwords
Digit
Special Character
Minimum Characters
Password Changes
Enable Non-Admin Password Changes
Admin Setup Lockout
Enable Admin Setup Lockout
Master Password Lockout
Enable Master Password Lockout
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert
Table 12. System setup options—Update, Recovery menu
Update ,Recovery
UEFI Capsule Firmware Updates
Enable UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
74
System setup
Enforces password restriction that the password must contain at least one
digit.
Default: OFF
Enforces password restriction that the password must contain at least one
special character.
Default: OFF
Controls the minimum number of characters allowed for password.
Default: 04
Enables or disables the user to change the system and hard drive password
without the need for admin password.
Default: ON
Enables or disables the user from entering BIOS Setup when an Admin
Password is set.
Default: OFF
Enables or disables master password support.
Default: OFF
NOTE:
Hard drive passwords must be cleared before the setting can be
changed.
Enables or disables Non-Admin PSID Revert.
Default: OFF
Enables or disables BIOS updates through UEFI capsule update packages.
Default: ON
Enables the computer to recover from a bad BIOS image, as long as the Boot
Block portion is intact and functioning.
Default: ON
NOTE:
BIOS recovery is designed to fix the main BIOS block and cannot
work if the Boot Block is damaged. In addition, this feature cannot work
in the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.
Controls flashing of the system firmware to previous revisions.
Default: ON
Advertisement
Table of Contents
