Dell Inspiron 27 7710 All-in-One Service Manual page 71

Table 5. System setup options—Integrated Devices menu (continued)
Integrated Devices
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Enable Rear USB Ports
Enable Side USB Ports
Enable USB Boot Support
Table 6. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
Table 7. System setup options—Display menu
Display
Touchscreen
OSD Button Management
Full Screen Logo
Enables or disables all integrated audio controller.
Default: ON
Enables or disables microphone.
By default, Enable Microphone is selected.
Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
Enables or disables rear USB ports.
By default, Enable Rear USB Ports is selected.
Enables or disables side USB ports. .
By default, Enable side USB Ports is selected.
Enables or disables USB Boot Support.
Default: ON
Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID functions.
When enabled, all NVMe and SATA devices will be mapped under VMD
controller. Windows RST (Intel Rapid Restore Technology) driver, or Linux
kernel VMD driver must be loaded in order to boot the OS.
Enables or disables the onboard drives.
Default: ON
Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).
Default: OFF
Displays the information of various onboard drives.
Enables or disables the touchscreen.
Default: ON
Enables or disables OSD buttons.
Default: OFF
When turned on, the full screen logo is displayed if the image matches the
screen resolution.
Default: OFF
System setup 71