Dell Inspiron 27 7710 All-in-One Service Manual page 29

Steps
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the
wireless card
Main
Auxiliary
2. Place the wireless-card bracket on the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot.
4. Slide the wireless card at an angle into the wireless-card slot.
5. Replace the screw (M2x3.5) that secures the wireless-card bracket to the wireless card.
Next steps
1. Install the system-board
2. Install the I/O cover.
3. Install the back cover.
4. Install the stand.
5. Follow the procedure in
Antenna-cable color
White
Black
shield.
After working inside your
Silkscreen marking
MAIN
AUX
computer.
△ (white triangle)
▲ (black triangle)
Removing and installing components 29