Accessing The Web Config Utility; Changing A Usb Connection To A Wi-Fi Connection - Epson SureColor P8570D Series User Manual

Accessing the Web Config Utility

You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
Note: For more information on the Web Config utility, see the online Administrator's Guide.
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web
browser.
4. Enter your product's IP address into the address bar.
You will be prompted to change the password the first time you log in to Web Config. Be sure to write
down the new password and keep it in a safe place. Passwords can not be restored or changed
unless the correct password is entered. If you forget your password, contact Epson for assistance.
Parent topic:
Related tasks
Printing a Network Status Sheet
Setting a Password and Locking the Control Panel

Changing a USB Connection to a Wi-Fi Connection

If you have already connected your product to your computer using a USB connection, you can change
to a Wi-Fi connection.
1. Disconnect the USB cable from your product.
2. Uninstall your product software.
3. Download and install your product software from the Epson website using the instructions on the
Start Here sheet.
Parent topic:
Related concepts
Uninstall Your Product Software
Changing or Updating Network Connections
Changing or Updating Network Connections
51