Adjusting The Paper Feed Using The Product Control Panel - Epson SureColor P8570D Series User Manual

Adjusting the Paper Feed Using the Product Control Panel

If your printouts are grainy or blurry, or you still see dark or light horizontal bands, you may need to
adjust the paper feed using the product control panel.
1. Load roll paper or cut sheet paper in the printer.
Note: Load paper that is at least 13.3 inches wide by 21.9 inches long (338 mm × 558 mm).
2. Make sure the correct paper type is selected.
Note: If you are using commercially available paper, make sure you create the custom paper
settings in advance.
3. Select
4. Select one of the following:
• Auto: automatically adjusts the paper feed setting (takes 9 to 35 minutes to complete); Epson
recommends running this option first.
• Manual: if automatic adjustment results are not satisfactory and you want to perform adjustments
based on specific printing needs, select an adjustment setting from the following:
• Quality First: prints adjustment patterns to adjust the feed for image quality
• Length Accuracy First: prints measurement positions to adjust the feed for images that require
more precise dimensions and length, such as CAD files
Note: You will need a 24-inch (610 mm) ruler that can measure in 0.5 mm increments to
perform the adjustment.
5. Select Start to print an adjustment pattern.
6. Depending on your adjustment selection, do one of the following:
• Quality First: Follow the instructions on the LCD screen to select the best patterns for the first set
of adjustment patterns and select OK.
After the second set of adjustment patterns prints, repeat the process.
• Length Accuracy First: Use a ruler that can measure in 0.5 mm increments to measure the
registration marks. Enter the measurement on the LCD screen and select OK.
The screen displays a confirmation message and returns to the home screen.
> Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
291