Epson SureColor P8570D Series User Manual page 242

Setting
Memory Device Interface
Thick Paper
Bidirectional
Print Nozzle Check Pattern
During Print
Use Production Stacker
PC Connection via USB
USB I/F Timeout Setting
*The Printing Language and Universal Print Settings menus can be locked by an administrator. If you
cannot access or change these settings, contact your administrator for assistance.
Paper Source Settings
Options Description
Enable Select whether to Enable or Disable use of a
memory device
Disable
On Select On to widen the platen gap to prevent
scuffing if you are printing on thick paper
Off
On Select On if you want the print head to move
left and right during printing
Off
Select Off to decrease misalignment of ruled
lines, but slow down printing
Every Page Sets whether to print a nozzle check pattern
before the printer prints each page
Off
Enable Select whether to Enable or Disable use of
the optional production stacker
Disable
Enable Select whether to Enable or Disable access
to the printer from a USB-connected computer
Disable
20 to 600 seconds Specifies the length of time before ending
communication from a USB-connected
computer; available only when the optional
SSD Unit is connected
242