Table of Contents
Advertisement
3. Select Settings > Maintenance > Power Ink Flushing.
4. Follow the on screen instructions to begin the power ink flushing.
When the power ink flushing is finished, a confirmation screen appears.
Caution: Never open any covers or turn off the product during a power ink flushing or you may
damage it.
5. Print a nozzle check pattern and see if there are gaps in the lines.
If nozzles are still clogged, turn off the printer and leave it off overnight. If nozzles are still clogged,
contact Epson for support.
Parent topic:
Related tasks
Checking the Nozzles Using a Computer Utility
Checking the Nozzles Using the Product Control Panel
Related topics
Media Handling
Adjusting Print Quality Using the Product Control Panel
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to adjust print quality using the product control panel.
1. Make sure roll paper or cut sheet paper is loaded in the printer. You need at least this much paper to
print the adjustment pattern:
• Roll paper: 16.5 inches (420 mm)
• Auto sheet feeder: 2 sheets of paper sized A3 (11.7 × 16.5 inches [297 × 420 mm]) or A4
(8.3 × 11.7 inches [210 × 297 mm])
• Cut sheet feeder: 1 sheet of paper sized A2 (16.5 × 23.4 inches [420 × 594 mm]) or larger, or 2
sheets of paper smaller than A2 (16.5 × 23.4 inches [420 × 594 mm]), loaded one at a time
2. Press the
3. Make sure the correct paper type is selected on the product control panel.
4. Select Settings > Maintenance > Print Quality Adjustment.
Note: You can also access this feature by selecting Settings > Paper Setting > Media Adjust.
Print Head Cleaning
home button, if necessary.
156
Advertisement
Table of Contents
