Operation; Base; Using The Stage Plate; Adjusting The Focus Adjustment Knob Tension - Olympus SZ61 Instructions Manual

3

OPERATION

3-1 Base

To decrease
To increase

3-2 Microscope Body

6
Downloaded from ManualsNet.com
Clamp.
a
a
search engine
1

Using the Stage Plate

When reflected light illumination is used, the stage plate can be placed
either the white or black surface facing up depending on which side
makes the specimen easier to view.
· To maintain the ESD performance, use the black surface of
NOTE
the SZ2-SPBW stage plate.
· When transmitted light illumination is used, use the optional
SP-C transparent glass stage plate.
2

Adjusting the Focus Adjustment Knob Tension

This operation is intended to facilitate the rotation of the
TIP
knobs while preventing spontaneous drop of the microscope
body. It is recommended to set the knob tension to a slightly
higher level than the point where spontaneous drop occurs.
1
Hold the left and right focus adjustment knobs a with both hands,
fix the left knob and rotate the right knob. The rotation tension of the
knobs increases or decreases according to the direction in which the
right knob is rotated.
1

Adjusting the Interpupillary Distance

While holding the left and right eyepiece sleeves a with both hands,
look through the eyepieces and adjust for binocular vision until the
left and right fields of view coincide completely.