Initializing Printer Memory; To Initialize Printer Memory; Data Error - Casio RJA514733-9 Startup Manual

Memory Data Backup
The power to retain the data you input and store in printer memory is
provided by a built-in memory backup battery. When the replacement
date indicated on the sticker affixed to the back of the printer is reached,
the battery will start to weaken, creating the risk that memory data will
be corrupted or lost. Be sure to take the printer to your retailer or your
nearest CASIO service center to have the memory backup battery
replaced before the replacement date is reached. Note that you will be
charged for backup battery replacement.
Be sure to keep separate backup copies of all important data you have
stored in printer memory.
8
E

Initializing Printer Memory

You should initialize the memory of the printer before using it for the first time,
after you have not used it for a long time, or if it fails to operate normally when
you turn power on.
Important!
Initializing printer memory clears its memory of all input data.

To initialize printer memory

1.
Make sure that the printer is turned off.
2.
While holding down the PRINT and ESC keys, press
first, but keep PRINT and ESC depressed until power turns on and a con-
firmation message appears on the display.
3.
In response to the confirmation message that appears, press SET to ini-
tialize the printer memory or ESC to abort.

Data Error

Whenever you turn on the printer, it performs an internal check of its memory
and functions. If it finds a serious data problem, it will display the following
message:
DATA ERROR! INITIALIZE THE PRINTER!
When this message appears, press any key. Next, in response to the "INI-
TIALIZE? SET/ESC" message that appears, press SET to initialize printer
memory (which deletes everything in memory) or ESC to clear the message
without initializing.
. Release