To Remove The Tape Cartridge From The Printer - Casio RJA514733-9 Startup Manual

8.
Load the tape cartridge into the printer.
Make sure that the tape and ink ribbon pass between the print head the
rubber roller as shown in the illustration below. Take care that the ink
ribbon does not snag on the protrusion near the print head. Press down
on the tape cartridge until you hear it click securely into place.
Important!
Installing the tape cartridge improperly or failing to secure it properly in
place can cause the ribbon to break.
Ink ribbon
Tape
Protrusion
14
E
Rubber roller
Tape
Print head
Make sure
these lines
are
parallel.
9.
Close the cassette cover.
Press down on the cassette cover until you hear it click securely into
place.
After loading the tape cartridge in the printer, never pull on the tape or
try to push the tape back into the cartridge.

To remove the tape cartridge from the printer

1.
Press to turn off the printer.
2.
Press the cassette cover release and open the cover.
3.
Grasping both sides of the tape cartridge, lift is straight up.