Casio RJA514733-9 Startup Manual page 27

6.
Press SET to start printing.
To interrupt printing part way through, press ESC.
Important!
Never turn off the printer while it is performing a print operation.
Never open the cassette cover while the printer is performing a print
operation.
Do not touch the tape coming out of the printer until it is cut automatically
or until printing is complete.
Before printing, make sure that the tape cartridge has enough tape left to
finish the print operation. If the tape cartridge runs out of tape during a print
operation, press ESC to cancel the print operation.
Make sure that cut tape does not pile up in the area around the tape outlet.
Tape building up around the tape outlet can cause the outlet to become
blocked, causing a tape jam and malfunction of the printer.
Consecutive printing of text that contains large areas of black cause the
printing to stop and the message "
display. This indicates that the printer is overheated. If this happens, just
stand by and printing will resume as soon as the printer returns to normal
temperature.
If the message "
NOW PRINTING
try making the print density lighter. See page 55 of the User's Guide.
" to appear on the
NOW PRINTING
" appears and printing stops frequently,
To affix a tape label to a surface
1.
If necessary, use a pair of scissor to trim the tape to the size and shape
you want.
2.
Peel off the backing of the label and affix it to the surface you want.
When using the CONT HALF CUT or FULL+HALF CUT
tape cut mode
Carefully twist the tape at the position where the tape is half-cut, and peel off
the backing paper.
When using the FULL CUT tape cut mode
Bend a corner of the tape and peel off the backing paper.
Note that pasting a label onto a surface can cause adhesive to remain on
the surface when you remove the label.
Important!
Do not affix tape labels to objects and in the locations described below.
Locations exposed to direct sunlight or rain
On the skin of a person or animal
On property belonging to others, utility poles, etc.
In parks, train stations, or other public places.
Incompatible Surfaces
The label tape may not adhere properly to the following types of sur-
faces.
Surfaces that are rough
Surfaces that are wet, oily, dusty, etc.
Surfaces made of special plastics (silicon, PP, etc.)
Half cut
25
E