Load A Different Film Size To Match A Print Request - Konica Minolta DRYPRO SIGMA 2 Operation Manual

Basic Operating Tasks
guides (5), and then slide the film cartridge into the imager to engage the detents (6)
in the bottom of the cartridge.
6. Close the film supply door.
7. Check that the display screen changes to reflect the new film count. A new film
cartridge contains 125 sheets.

Load a Different Film Size to Match a Print Request

If a print request requires a different film size, the requested film size flashes on the
display screen. Change the installed film to match the print request.
• M = mammography film
• B = blue base film
Figure 8: The requested film size flashes, and the Film Size symbol indicates the need to load a
different film size and/or type. In this example, mammography 10 x 12 in. film is requested. The
amber text changes between "M10" and "M12." Load it to continue with the print request.
1. If the Pause symbol is on, press it and wait until it turns off.
2. Open the film supply door (1).
3. Hold the edges of the film cartridge and lift the cartridge out of the film supply.
2–10
3
2
6
5
4
1
H241_0006BCB
H241_0006BC
AD3435_en | 2017-11-17