Konica Minolta DRYPRO SIGMA 2 Operation Manual page 56

Maintenance and Troubleshooting
3. Look for and remove any jammed film:
a. Remove the film cartridge, and check for any misplaced film in the imager.
b. Remove any loose film near, in, or partially in the cartridge.
c. If the film is not loose, carefully turn the exposure transport knob (1) and the
vertical transport knob (2) clockwise to remove the film from the rollers:
d. Reinsert the film cartridge in the imager.
4. Reinstall/close the covers.
3–28
1
2
H241_0002DC
AD3435_en | 2017-11-17