Error Indicators On The Display Screen; Recognize And Handle A Calibration Error - Konica Minolta DRYPRO SIGMA 2 Operation Manual

Maintenance and Troubleshooting

Error Indicators on the Display Screen

The imager can detect errors and other conditions that require a response. Some errors
or abnormal conditions are reported on the display screen in the form of condition codes
and symbols.
Note
These errors are also reported at the Web Portal.

Recognize and Handle a Calibration Error

When the calibration has failed, the display screen shows a 624, 631, or 632 error and the
Calibrate symbol is amber.
Figure 14: In this example, the amber indicator light and Calibration symbol indicate that
calibration of the film in the lower cartridge has failed.
The most common cause is a film-related problem. Depending on the cause, you may be
able to keep printing, but the imager may not be optimally calibrated for this film lot.
Attempt a manual calibration. If the calibration fails again, load a new film cartridge.
Related topics:
Calibrate the Imager for the Loaded Film
3–6
AD3435_en | 2017-11-17