Part 4 Deleting And Inserting Characters; Moving The Cursor; To Move The Cursor; Deleting Individual Characters - Casio KL-C500 User Manual

Part 4 Deleting and Inserting Characters

This section describes everything you need to know about deleting and editing
characters you have already input.

Moving the Cursor

Use the cursor keys to move the cursor around the display and position it for
deleting and editing characters.

To move the cursor

Press u to move the cursor one line up and i to move it one line down.
Press t to move the cursor to the left, and y to move the cursor to the right.
Press SHIFT and then y to move the cursor to the beginning of the next
block to the right.
(See page E-25 for details about blocks).
Press SHIFT and then t to move the cursor the beginning of the current
block. If the cursor is already at the beginning of a block SHIFT t moves it to
the beginning of the next block to the left.
Press FUNCTION and then t to make the cursor jump to the beginning (far
left) of the current line.
Press FUNCTION and then y to make the cursor jump to the end (far right) of
the current line.
Press FUNCTION and then u to make the cursor jump to the first character of
the text.
Press FUNCTION and then i to make the cursor jump to the end of the text.
Holding down the t or y cursor key moves the cursor at high speed.

Deleting Individual Characters

You can delete individual characters with either the BS key or the DEL key. The
only difference between the operation of these two keys is the location of the
cursor.

To delete characters using the BS key

Example: To change the word "commmputer" to "computer".
1. Use t and y to move the cursor under "p".
2. Press BS twice to delete the two m's to the left of the cursor, shifting "puter"
to the left as you do.

To delete characters using the DEL key

Example: To change the word "commmputer" to "computer".
1. Use t and y to move the cursor under the first (far left) "m".
2. Press DEL twice to delete the two m's at the cursor's position, shifting "mputer"
to the left as you do.

Clearing the Display

The label printer gives you a choice of clearing the entire display or only a
specific block of text.

To clear all text

1. Press FUNCTION and then BS (CLS).
2. Use u and i to highlight "ALL" (if it isn't already highlighted).
3. Press SET.
4. Press SET to clear all of the text on the display or ESC to abort without
clearing anything.
E-15