Part 4 Deleting And Inserting Characters; Moving The Cursor; To Move The Cursor; Deleting Individual Characters - Casio KL-70E User Manual

2. Use the H, J, K and L cursor keys to move the underlining to the sym-
bol you want.
• Not all of the available symbols fit on the display. The menu will scroll when
you press the cursor keys.
• In this example, underline #.
3. After you underline the symbol you want, press
SET.
• This returns to the input screen, with the symbol
you selected input at the location where the cur-
sor was located when you displayed the symbol
list.
Part 4 Deleting and Inserting Characters
This section describes everything you need to know about deleting and editing
characters you have already input.

Moving the Cursor

Use the cursor keys to move the cursor around the display and position it for
deleting and editing characters.

To move the cursor

• Press H to move the cursor to the left, and J to move the cursor to the right.
• Press FUNCTION and then H to make the cursor jump to the beginning (far
left) of the characters on the display.
• Press FUNCTION and then J to make the cursor jump to the end (far right)
of the characters on the display.
• Holding down the H or J cursor key moves the cursor at high speed.

Deleting Individual Characters

You can delete individual characters with either the BS key or the DEL key
(which is the K cursor key). The only difference between the operation of these
two keys is the location of the cursor.

To delete characters using the BS key

Example: To change the word "commmputer" to "computer".
1. Use H and J to move the cursor under "p".
IO #
2. Press BS twice to delete the two m's to the left of the cursor, shifting "puter"
3. Press FUNCTION and then J to jump back to the end of the characters for

To delete characters using the DEL key

Example: To change the word "commmputer" to "computer".
1. Use H and J to move the cursor under the first (far left) "m".
2. Press DEL twice to delete the two m's at the cursor's position, shifting "mputer"
3. Press FUNCTION and then J to jump back to the end of the characters for

Clearing the Display

Use the following procedure to clear all input text from the display.

To clear the display

Press FUNCTION and then BS (CLS).
At this time the message CLS? appears on the display to confirm that you want
to clear the display. Press SET to clear or ESC to abort the operation without
clearing anything.

Text Editing

You can use the following procedures to edit text on the display.

To insert new characters

Example: To change the text "ABCDEF" to "ABCXYZDEF".
1. With the original text on the display, move the cursor under the letter "D".
to the left as you do.
more input.
to the left as you do.
more input.
pute
E-11