Using The Pc Keyboard; Setting The Speaker And Microphone Volume - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
4.2.1

Using the PC keyboard

The following applies when using optiClient with the PC keyboard:
Procedure
Accept call
End call (hang up)
Scroll functions
Confirm function
Volume control
Dial directly from the clipboard; a dial prefix is not
added to the clipboard contents.
Dial directly from the clipboard; the dial prefix set
for the location is automatically inserted first (see
also Configuring Location Information).
4.2.2

Setting the speaker and microphone volume

Setting the speaker volume
Key Procedure
The speaker key is used for speaker volume control.
You can change the speaker volume during an active call by clicking on the "+" or "-"
symbol, respectively. The optiClient phone changes the volume accordingly and also
shows the setting in the display.
Setting the microphone volume
Key Procedure
The speaker key is used for microphone volume control.
You can change the microphone volume during an active call by clicking on the "+" or
"-" symbol, respectively. The optiClient phone changes the volume accordingly and
also shows the setting in the display.
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
optiClient phone User Interface
Key/key combination
s
_
X or Z
=
+ or - on the dial pad
< + +
Ì + v
4bof.fm
General Operation
4-5