Hardware And Software Requirements - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
1.1

Hardware and Software Requirements

Hardware
Minimum processor and RAM requirements for optiClient 130 phone/office:
●
Processor
RAM
Minimum processor and RAM requirements for optiClient 130 easyCom:
●
Processor
RAM
> These specifications are minimum requirements. optiClient 130 is an application
that transfers incoming and outgoing voice packets in real time. This means that
the PC being used must have enough CPU capacity and system resources avail-
able for optiClient 130 and other applications. If other applications overload the
CPU at the same time, voice quality may suffer as a result.
> Please consult the Readme file on the system CD for further information on
optiClient 130.
150 MB free hard disk space
●
CD-ROM drive
●
Ethernet adapter (for QoS functionality with 802.1p support)
●
Full-duplex sound card or optiPoint handset
●
In addition, when using a sound card :
●
– Microphone and speaker (possibly also handset or headset)
or
– a multimedia keyboard with or without a hookswitch. The hookswitch will only work un-
der Windows 2000.
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
Windows 98SE Windows 2000
Pentium II with Pentium III with
233 MHz
at least 64 MB at least 128 MB at least 256 MB
Windows 98SE Windows 2000
Pentium II with Pentium III with
450 MHz
at least 128 MB at least 256 MB at least 256 MB
Introduction and Important Notes
Hardware and Software Requirements
Windows XP
Pentium III with
450 MHz 450 MHz
Windows XP
Pentium III with
450 MHz 450 MHz
1einl.fm
1-3