Configuring Parameters For Pc Performance - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
3.2.3

Configuring Parameters for PC Performance

To configure PC parameters, proceed as follows:
1. Activate the PC Performance tab in the administration tool:
Display
2. The entries under Global settings for logged on user are global Windows settings which
are valid for users logged on system-wide, i.e. outside optiClient 130 V4.0.
Specify the Menu show delay in milliseconds. The default value is 400 ms.
●
In the timer field below, enter the wait time (in seconds) which should elapse after the
●
last user input before an application controlled in the foreground is actually brought to
the top. This standard Windows timer is generally only used for applications that do not
by default allow the foreground windows of other applications to run at the same time.
The standard value is 200 s.
Click Save to store your input immediately and directly in the Windows registry.
●
Click Defaults to display Windows default settings. The values are displayed in the in-
●
put fields.
A31003-G2540-A100-3-76A9, 04/2003
optiClient 130 V4.0, User Manual
First Steps and User Configuration
Working with the Administration Tool
3benkonf.fm
3-7