Putting The Handset Into Service; Removing The Protective Cover; Inserting The Batteries - Siemens HiPath 4000 Operating Instructions Manual

Putting the handset into service

Putting the handset into service

Removing the protective cover

Inserting the batteries

optiPoint WL1 professional
To remove the Battery Pack, press down on the latch on the Battery Pack
on the back of the Wireless Telephone. The Battery Pack releases outward.
To replace it, slide the lip of the Battery Pack into the bottom of the cavity.
Push the top of the Battery Pack until it snaps into place. You should not
have to force it against the Wireless Telephone.
18
Remove the protective cover from the display before
putting the handset into service.
• Please observe the safety notes (
• Only use approved batteries.
• Open the battery compartment in a dust-free environment only.
• When you remove the batteries all settings will be retained.
page 2).