Putting The Mobile Telephone Into Service; Removing The Protective Cover; Inserting The Battery - Siemens HiPath 3000 Operating Instructions Manual

Putting the mobile telephone into service

Removing the protective cover

Inserting the battery

Opening the Press the ridged area and slide back the battery compartment lid.
battery
compartment
Inserting Insert the permitted battery observing correct polarity as indicated in
the battery compartment.
the battery
Closing the Replace the lid and slide it back over the battery compartment until it
locks.
battery
compartment
Remove the protective cover from the display be-
fore putting the mobile telephone into service.
Note:
The battery supplied is not charged. It is only charged in the
mobile telephone.
Note:
• Please observe the safety notes on page I.
• Only use permitted battery, see page 11.
• Open the battery compartment in a dust-free environment
only.
• Your telephone directory entries and all settings remain
stored even if you remove the battery. The date and time
settings, however, are lost. See page 37.
9