Siemens HiPath 4000 Operating Instructions Manual page 56

Forwarding calls
Step by Step
NEXT
-->
FWD-VAR-ALL-EXT
NEXT
-->
SERVICE
-->
DESTINATIONS
FORWARD
NEXT
NEXT
ENTER DESTIN.:
-->
SAVE
56
Confirm to select the next variable forwarding type.
OK
Output on first line.
Confirm to select the next variable forwarding type.
OK
or
--> To edit the current variable forwarding type, select the
required command.
Programming a forwarding destination
Press the off-hook key twice.
Select and confirm the service menu.
OK
Confirm.
OK
Confirm. The display shows "variable forwarding".
OK
OK Confirm. The display shows "fixed forwarding".
Confirm. The display shows "Forwarding for internal".
OK
Select and confirm.
OK
p
Enter the phone number for the forwarding destination.
Any destination previously programmed will be over-
written.
OK Confirm when the complete number has been entered.
To select a different forwarding type, proceed as de-
scribed on
If variable forwarding was previously programmed and
activated, it is deactivated and the forwarding destina-
tion is deleted ((for exception, see
forwarding is deactivated.
page 55.
page 55). Fixed