Siemens HiPath 4000 Operating Instructions Manual page 73

Step by Step
Not authorized
Not allowed
or
Not available
Do not disturb
No Service
3 chirps (audio)
Possible cause:
b) Blocked function was called
b) Incorrect PIN was entered
Possible remedy:
a) Apply to the relevant service personnel
for the COS for the blocked function
b) Enter the correct PIN
Possible cause:
Phone number was not fully entered, the star or hash
key was not pressed.
Possible remedy:
Enter the phone number correctly or as prescribed
Possible cause:
Data transfer active
Possible remedy:
Wait and try again later.
Possible cause:
You may be outside of the covered area.
Possible remedy:
Walk back into the coverage area. The in-service tone in-
dicates service is re-established. If functionality does
not return, note the error message and contact your
system administrator.
Possible cause:
Probably because the AP has no bandwidth available.
Possible remedy:
None. This is only a warning, the call will handoff to the
best AP once it becomes available.
Tips
73