Error Messages - Casio CW-L300 User Manual

Error Messages

Message
DATA ERROR! • You are trying to operate the
INITIALIZE THE printer without initializing its
PRINTER! memory first.
➜ Initialize printer memory.
ENTIRE PHRASE • The text in the phrase
COULD NOT BE memory you are trying to
RECALLED! recall will cause the number
of characters to exceed the
allowable limit for the location
where you are inserting it.
➜ Re-input so the recalled
phrase memory text does not
cause the allowable number
of characters to be exceeded.
ILLEGAL • You are attempting to input
CHARACTERS! characters that are not
allowed for bar code printing.
➜ Delete the disallowed
characters.
• For a CODABAR barcode,
you are trying to use a
character other than A, B, C,
or D as the start code or stop
code.
➜ Re-input the correct
character.
• In the case of a numbering
label, you are trying input a
space after a number.
➜ Delete the space after the
number.
Cause and Action See page:
Startup
Guide,
page 8
46
36
17
Message
INPUT A VALUE! • You are trying to print
numbering labels without any
input.
➜ Input the numbers you want.
LABEL LONGER THAN • To print, press SET.
SETTING • To cancel printing, press
SET/ESC ESC. You can then decrease
the number of characters,
change to a longer tape
setting, or select auto tape
length.
LENGTH OF PRINT IS • You are trying to print
TOO LONG! something that is longer than
the length of tape available.
➜ Make the label shorter or
reduce the number of copies.
LINK ERROR! • The USB cable is not
CHECK ALL connected securely to the
CONNECTIONS! USB port.
➜ Plug the USB cable securely
into the USB port.
• The computer is shut down.
➜ Start up the computer.
LOAD A TAPE • There is no tape cartridge
CARTRIDGE loaded in the printer or the
tape cartridge is not loaded
correctly.
➜ Check the tape cartridge.
See page:
Cause and Action
17
26
26
Read this
first
Startup
Guide,
page 13
63
E