Error Messages - Casio Printer CW-75 User Manual

Error Messages

Message Cause and Recommended Action
LOW BATTERY! Battery power is low.
➔ Replace batteries as soon as possible.
CONTINUE TO
PRINT? SET/ESC
LOW BATTERY! Battery power is low.
➔ Replace batteries as soon as possible.
DATA ERROR! You are attempting to use the printer without
INITIALIZE THE initializing its memory.
➔ Initialize memory immediately.
PRINTER!
PRINT ERROR! You are attempting to print without an ink ribbon
LOAD AN INK cassette loaded in the printer, or the cassette is not
RIBBON CAS- loaded correctly.
➔ Correctly load the ink ribbon cassette.
SETTE!
PRINT ERROR! The loaded ink ribbon cassette has reached its end.
➔ Replace it with another ink ribbon cassette.
NO INK RIBBON!
NOT ENOUGH INK There is not enough ink ribbon to completely print
RIBBON FOR the label you are trying to print.
➔ Replace it with another ink ribbon cassette.
NEXT PRINT
PRINT ERROR! You are attempting to print without a disc on the disc
LOAD A DISC tray.
➔ Correctly place a disc onto the tray.
INTO THE
PRINTER!
NO DATA! You are attempting to recall, edit, or delete a preset
phrase memory that does not contain any data.
➔ Select the correct preset phrase memory.
You are attempting to recall or delete stored label data
when none exists.
➔ Save label data before trying to recall it.
62
E
Message Cause and Recommended Action
ENTIRE PHRASE The number of characters in the preset phrase you
COULD NOT BE recalled will cause the number of allowable
RECALLED! characters to be exceeded. In this case, the phrase
will be recalled only up to the allowable number of
characters.
➔ You can use the recalled characters, or reduce the
number of characters in the label in order to allow
recall of the entire preset phrase.
NO INPUT TEXT! The label you are attempting to print or preview does
not contain any input text.
➔ Select a different label or input text.
SAME NAME The name you are trying to use to save a label is
ALREADY USED! already used for an existing label in memory.
➔ Use a different name.
LINK ERROR! Data could not be received from the connected
CHECK ALL computer.
➔ Check all connections and make sure you are
CONNECTIONS!
performing the required operations correctly.
MEMORY FULL! There is not enough memory to store the data you
are trying to save.
➔ Delete some of the data from memory to make
room from the new data.