Recording On A Cassette Tape - Sharp CD-G10000 Operation Manual

Various tape functions
Function Main unit Remote
control
Play
Stop
Fast for-
ward/Fast
rewind
(TAPE 2
only)
Caution:
To remove the cassette, press the
compartment.
Before changing from one tape operation to another, press the
button.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.

Recording on a cassette tape

Before recording:
When recording important selections, make a preliminary test to
Operation
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
Press in the stop
from malfunction of this unit.
mode.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
Press in the playback,
For recording, use only normal tapes. Do not use metal or
fast forward or fast re-
CrO tapes.
wind mode.
Recording can be operated in the TAPE 2 compartment only.
The TAPE 1 is for playback only.
Press in the playback
or stop mode.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
button, and then open the
Side A
Tab for side B Tab for side A
CD-G10000
CP-G10000S
33