Setting The Reception Mode - Sharp UX-P200 Operation Manual

Setting the Reception Mode

Setting the Reception Mode
Your fax has two modes for receiving incoming faxes:
FAX mode:
Select this mode when you only want to receive faxes on your line. The fax
machine will automatically answer all calls on four rings and receive incoming
faxes.
TEL mode:
Select this mode when you want to receive both phone calls and faxes on the
line connected to the fax machine. All calls, including faxes, must be
answered by picking up the fax machine's handset or an extension phone
connected to the same line.
Setting the reception mode
Make sure a document is not loaded in the document feeder, and then
RESOLUTION/
press
RECEPTION MODE
♦
Note: When a document is loaded in the document feeder, pressing
RESOLUTION/
RECEPTION MODE
RESOLUTION/
RECEPTION MODE
For more information on receiving faxes in FAX and TEL modes, see Chapter
3, Receiving Faxes (page 36).
20
until the arrow in the display points to the desired mode.
adjusts the resolution for faxing and copying.
1 2 3
4 5 6
7 8 9
0
RESOLUTION/
RECEPTION MODE
TEL FAX
JAN-01 10:30
TEL FAX
JAN-01 10:30