Setting The Reception Mode - Sharp UX-A760 Operation Manual

Setting the Reception Mode

Entering your name
Enter your name in the machine.
♦
Your entered name will be printed
automatically at the top of all fax
pages you send.
F
1
Press ,
2
Press to select SET.
(To clear your name, press
twice and go to Step 5.)
3
Enter your name by pressing
number keys for each letter as
shown in the chart on page 7. Up to
24 characters can be entered.
•
To backspace and clear a mistake,
press on the UX-P710, or
C
on the UX-A760.
START
4
Press
Display:
[DATE&TIME SET]
5
Press
14
, .
.
to exit.
Setting the Reception Mode
The machine has the following modes
for receiving incoming faxes:
FAX mode:
Select this mode when you only want to
receive faxes on your line. The machine
automatically answers all calls and
receives incoming faxes.
TEL mode:
This mode is the most convenient for
receiving phone calls. Faxes can also
be received; however, all calls must
first be answered by picking up the
machine's handset or an extension
phone connected to the same line.
TEL/FAX (T/F) mode:
This mode is convenient for receiving
both faxes and voice calls. The
machine answers all calls on a preset
number of rings. If the machine detects
that a call is a voice call (including a
manually dialled fax), it will make a
special ringing sound to alert you to
answer. If the machine detects that the
call is an automatically dialled fax, it will
begin reception.
A.M. ( ) mode (UX-A760 only):
Select this mode when you go out and
want the machine's answering system
to answer all calls. Voice messages will
be recorded, and fax messages will be
received automatically.