User Programs - Sharp AR-203E Operation Manual

3
To enter the toner save mode, press the
light ( ) key. The light and dark
indicator marked "1" will light up,
indicating the toner save mode is
selected.
4
Press the exposure mode selector key.
The PHOTO (
steadily. The light and dark indicator marked "3" will light up.
The toner save mode is now active.
To return to the standard mode, repeat the procedure but use the dark
( ) key to select exposure level "5" in step 3.

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or
cancelled as desired.
Setting the user programs
1
Press and hold down the light (
seconds until all the alarm indicators (
and "
2
Use the left copy quantity (
number. The selected number will blink in the left side of the
display.
3
Press the start (
steadily lit and the currently selected parameter number for the
program will blink on the right side of the display.
4
Select the desired parameter using the right copy quantity
( ) key. The entered parameter number will blink on the right
of the display.
Program
No.
1 Auto clear time
2 Preheat mode
Auto power shut- off
3
mode
Auto power shut- off
4
timer
) indicator will stop blinking and will light up
" appears in the display.
) key. The entered program number will be
Mode
) key for more than 5
,
) key to select a user program
Parameters
1 10 sec., 2 30 sec., *3
4 90 sec., 5 120 sec., 6
*1 30 sec., 2 60 sec., 3
4 30 min., 5 60 min., 6
7 240 min.
*1 ON, 2 OFF
*1 5 min., 2 30min., 3
4 120 min., 5 240 min.
, , ) blink
60 sec.,
OFF
5 min.,
120 min.,
60 min.,
5
43