Displaying Total Number Of Copies - Sharp AR-203E Operation Manual

Program
No.
6
10
21
24
25
26
27
28
29
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
will be steadily lit and the entered value will be stored.
6
Press the light (

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
1
Press and hold down the clear (
The total number of copies will appear in two steps, each with three
digits.
Example: Total number of copies is 1,234.
44
Mode
SPF automatic
original discharge
time (if installed)
Resolution of AUTO
& MANUAL mode
Reset factory
Prevention of OC
copies when the
SPF is up function
Copy effective paper
width setting function
(Bypass tray)
Copy effective paper
width setting function
(Tray 1)
Copy effective paper
width setting function
(Tray 2 if installed)
Selection of copy
start state (Polygon
rotation on/off)
Fusing temperature
setting when the
bypass tray is used
) key. The right-hand number in the display
To change the setting or to set another mode, press the clear
( ) key. The unit will return to step 2.
) key to return to the normal copy mode.
Parameters
1 5 min., *2 30 min.,
3 60 min., 4 120 min.,
5 240 min., 6
*1 300dpi, 2 600dpi
1 YES, *2 NO
*1 ON, 2 OFF
*1 Large (A4 width),
2 Small (B5R width)
*1 Large (A4 width),
2 Small (B5R width)
*1 Large (A4 width),
2 Small (B5R width)
*1 ON, 2 OFF
1 Low, *2 High
) key for approximately 5 seconds.
OFF