User Programs - Sharp MX-B200 Operation Manual

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or
cancelled as desired.
Setting the user programs
1
Press and hold down the light (
seconds until all the alarm indicators (
"
2
Use the left copy quantity (
number (For the user program numbers, see the following table.).
The selected number will blink in the left side of the display.
3
Press the start (
steadily lit and the currently selected parameter number for the
program will blink on the right side of the display.
4
Select the desired parameter using the right copy quantity (
The entered parameter number will blink on the right of the display.
Program
No.
1
2
3
4
6
10
13
21
22
24
Downloaded From ManualsPrinter.com Manuals
" appears in the display.
) key. The entered program number will be
Mode
Auto clear time
Preheat mode
Auto power shut- off
mode
Auto power shut- off
timer
SPF automatic
original discharge
time (Only operates
when an SPF is
installed.)
Resolution of AUTO
& MANUAL mode
Memory for printer
Reset factory
Sort auto select
Prevention of OC
copies when the
original cover/SPF
is up function
) key for more than 5
,
) key to select a user program
Parameters
1 10 sec., 2 30 sec., *3
4 90 sec., 5 120 sec., 6
*1 30 sec., 2 60 sec., 3
4 30 min., 5 60 min., 6
7 240 min.
*1 ON, 2 OFF
*1 5 min., 2 30 min., 3
4 120 min., 5
1 5 min., *2 30 min.,
3 60 min., 4 120 min.,
5 240 min., 6
*1 300dpi, 2 600dpi
1 30%, 2 40%, *3
4 60%, 5 70%
1 YES, *2 NO
*1 ON, 2 OFF
*1 ON, 2 OFF
63
, , ) blink and
) key.
60 sec.,
OFF
5 min.,
120 min.,
60 min.,
240 min.
OFF
50%,
7