Quick Start; Assemble; Fill - Shark LIGHT & EASY S3250CW Owner's Manual

Quick Start

fig. 1

ASSEMBLE

1 Fit together the extension tubes
as shown in the illustration.
(fig. 1)
2 Place the micro-fiber cleaning
pad underneath the mop head,
with quick fastener strips facing
up. Simply press the mop to the
pad to attach it. (fig. 2)
TOLL FREE: 1-800-798-7398
S3250CW_11_IB_ENG_100913.indd 4-5
fig. 3
fig. 2

FILL

3 Remove the cap to fill the
water tank. Use the filling flask
and funnel to fill the tank with
water to the "MAX FILL" line.
Replace the water tank cap.
(fig. 3)
fig. 4
STEAM CLEANING
4 Plug in the mop. Wait 30
seconds for the unit to heat up
and the steam to be ready.
Push the handle toward the
mop head in a pumping motion.
Customize steam output by slow
or fast mopping with a forward
and backward motion. (fig. 4)
fig. 5
BACKSAVER
5 Use the Shark ® Light &
Easy™ with backsaver
benefit to access tight
areas. Press the release
button on the handle
to lock the Light &
Easy™ Steam Mop in the
backsaver position. Press
the release button on the
handle again to straighten
the handle. (fig. 5)
www.sharkclean.com
10-09-13 10:57 AM