Getting Started - Shark LIGHT & EASY S3250CW Owner's Manual

Getting Started

When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you
buy them, so you get a quality
Shark Light & Easy Steam Mop.
® ™
c
b
a
d
e
a
Upper Handle Tube with Backsaver
benefit
b Lower Tube
c Steam Mop Base
d 2 All-Purpose Cleaning Pads
e
Filling Flask
f Funnel
2 TOLL FREE: 1-800-418-0934
S3250CW_11_IB_ENG_100913.indd 2-3
f
fig. 1
ASSEMBLY
1 Remove all the parts from the
package. Verify all the listed parts
are included.
2 Slide the Upper Handle Tube (the
tube with the handle) into the Lower
Tube (the short tube). Push the two
extension tubes together until you
hear them click into place. (fig. 1)
fig. 2
3
Insert the assembled handle piece
into the steam mop base. Push the
tube base together until you hear a
click. (fig. 2)
English
IMPORTANT: Never use the Light &
Easy™ Steam Mop without attaching
a micro-fiber cleaning pad to avoid
damage to your floor and mop.
www.sharkclean.com 3
10-09-13 10:57 AM