hOW TO SET ThE APPLIANCE FOR INDUCTION COOkTOP
COOkING
•
The induction cooktop elements may be hot and burns may occur. Do not touch the
surface elements until they have cooled down sufficiently.
CAUTION
•
At high or over the 6 level, never leave food unattended. Boilovers cause smoking and
greasy spillovers may catch on fire.
•
Be sure you turn the Touch control to
SWITChING ThE APPLIANCE ON
1. Touch the Lock control
seconds.
2. The appliance is switched on using the On/Off control
sensor.
Touch the On/Off control
The digital displays will show
After the On/Off control
setting must be selected within approximately 10 seconds. Otherwise, the appliance will
switch itself off for safety reasons.
SELECT COOkING zONE AND hEAT SETING
1. To select the cooking zone, touch the corresponding cooking
zone's key.
2. Within the next 5 seconds, slide your finger along the control
panel until the desired heat level setting appears in the
hotplate display.
•
Heat level 1.5 = lowest power level
•
Heat level 9 = highest power level
The heat level setting display lights up continuously after 5
seconds. The hotplate is switched on.
20_ Surface cooking
OFF when you finish cooking.
sensor for approximately 3
sensor for 2 seconds.
sensor has been activated to switch on your appliance, a heat
approx
2 sec.
Sliding
zone