Timer Function - Carrier RG10A2/BGEF Owner's Manual

3.2 TIMER FUNCTION

TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
Press TIMER button to initiate
Press Temp. up or down button for
the ON time sequence.
for multiple times to set the desired
time to turn on the unit.
TIMER
TIMER
ON
Press TIMER button to initiate
Press it for multiple times to set
the OFF time sequence.
the desired time to turn off the unit.
TIMER
TIMER
OFF
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each
press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments. (For example,
press 5 times to get 2.5h, and press 21 times to get 11h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
07
Point remote to unit and wait 1sec,
the TIMER ON will be activated.
xn
Point remote to unit and wait 1sec,
the TIMER OFF will be activated.
xn
Setting TIMER ON & OFF (example).
xn
TIMER
Unit turns
Timer starts
ON
Current 2:00PM 3:00PM 3:30PM 4PM
time 1PM
2.5 hours later
5 hours later
xn xn
TIMER
Unit turns
OFF
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.
5PM 6PM
08