Advertisement
3. HOW TO USE BASIC FUNCTIONS
3.1 BASIC OPERATIONS
ATTENTION
Before operation, please ensure the unit is plugged in and power is available.
Select AUTO mode
Set your desired temperature
Mode
AUTO
Mode
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Select COOL/HEAT mode
Set the temperature
COOL
or
Mode
HEAT
Mode
Select DRY mode
Set the temperature
Mode
DRY
Mode
NOTE:
In DRY mode, fan speed can not be set since it has already been automatically controlled.
Select FAN mode
Set the fan speed
FAN
Mode
Mode
05
Turn on the air conditioner
Turn on the air conditioner
Set the fan speed
Fan
Turn on the air conditioner
Turn on the air conditioner
On/Off
Fan
3.2 TIMER FUNCTION
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
Press Temp. up or down button for
Timer
Press
to initiate
for multiple times to set the desired
the ON time sequence.
time to turn on the unit.
TIMER
ON
Timer
Press Temp. up or down button for
Timer
Press
to initiate
for multiple times to set the desired
the OFF time sequence.
time to turn off the unit.
TIMER
OFF
Timer
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each
press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments. (For example,
press 5 times to get 2.5h, and press 21 times to get 11h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
Setting TIMER ON & OFF (example).
n
Timer
Unit turns
Timer starts
ON
Current
4PM
2:00PM
3:00PM
3:30PM
time 1PM
2.5 hours later
5 hours later
Point remote to unit and wait 2sec,
the TIMER ON will be activated.
n
Point remote to unit and wait 2sec,
the TIMER OFF will be activated.
n
n
Timer
Unit turns
OFF
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.
5PM
6PM
06
Advertisement
