FREE DESIGN: Aligning Tape Label Text
This section explains how to align tape label text.
LEFT
EQUAL
CENTER
RIGHT
I To align tape label text
1.
In the Free Design Mode, input the text you want.
2.
Press FORM.
3.
Use
and
to scroll to the ALIGN setting screen.
4.
Use
and
to select the alignment setting you want.
• Each press or
and
cycles the setting between EQUAL, CENTER,
RIGHT, and LEFT.
5.
After selecting the alignment setting, use
TAPE LENGTH setting screen.
6.
Use
and
to change the setting to FIX, and then press
and
to scroll to the
.
Length value becomes
highlighted.
7.
Use the number keys, or the
crease the length of the tape, and then press SET.
• If a label contains multiple lines, you can also align its text using the
TAPE LENGTH AUTO setting. In this case, alignment will be performed
on the shorter line of text as shown below.
LEFT
EQUAL
(decrease) and
(increase) keys to in-
CENTER
RIGHT
31
E