Loading/Unloading The "Instax Mini" Film Pack; Loading The Film Pack; Unloading A Used Film Pack - FujiFilm instax mini Link 2 User Manual

Loading/Unloading the "instax mini" Film
Pack
Caution
Do not open the film door until you have used up the film;
otherwise, the rest of the film will become exposed and turn
white, then the film can no longer be used�
• When you load the film pack, never press the two rectangular
holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may
damage the printer.
Use FUJIFILM instax mini Instant Film only. The instax SQUARE
film or instax WIDE film cannot be used.
Notes on the film pack
• Each FUJIFILM instax mini film pack contains one black film
protective cover and 10 film sheets.
• Do not remove the film pack from its inner foil packaging
until you are ready to load the film into the printer.
• The film cover is ejected automatically when the film door is
closed.
For details, refer to the instructions and warnings on FUJIFILM
instax mini Instant Film packaging.

Loading the Film Pack

1
Slide and hold the film door lock down, then open
the film door.
1
2
Insert film pack by aligning the yellow marks on the
film pack and body of the printer�
2
1
Note
Be sure to align the yellow marks on the printer and on the
film pack.
5
2
3
Close the film door�
4
A black film cover will automatically be ejected,
remove and dispose�

Unloading a Used Film Pack

1
Slide and hold the film door lock, then open the film
door�
1
2
Grasp the rectangular holes on the film pack and
remove the empty film cartridge, and dispose�
2
1
2