Samsung SF-370 Series User Manual page 47

When you have entered System Setup, now you can see one of the options in the display by selecting
buttons. The right column shows the suboptions belonging to the options.
arrow
Option
Ink Save Used for less ink consumption. It toggles On and Off.
Silent Mode Used when you want to turn off all sounds made by the machine.
Language The LCD Language setting determines the language of the text that appears on the control panel display
and information printing.
Sending Confirm A confirmation report shows whether the transmission was successful or not, how many pages were
sent, etc. Choose
not to print whatever the result is. Choose
transmission was unsuccessful. Note that a confirmation report of a memory transmission includes the
Image TCR (Transmission Confirmation Report) which shows the image of the first page with the
various information depending on the value you made as described in "Image TCR" on page 6.11.
Paper Size Select the paper size you will use for fax receive, and copying.
When receiving a document as long as or longer than the paper loaded, the machine can reduce the data
Auto Reduction
to fit your paper. If the fax machine cannot fit the data into one page with the feature enabled, the data is
divided and printed in actual size on two or more sheets.
Discard Size If you turn the Automatic Reduction feature off, you can set the fax machine to discard any excess
image at the bottom of the page when receiving a document as long as or longer than the paper loaded in
your machine. If the incoming fax is out of the margin you have set, it will be printed on two sheets of
paper. Enter the desired
Rings To Answer You can select the number of rings before answering an incoming call. If you are using your machine as
both a telephone and a fax machine, we suggest you set the ring count to at least 4 to give you time to
answer.
a This mode compensates for poor line quality and ensures accurate, error- free transmission with any
ECM Mode
other ECM-equipped facsimile machine. If the line quality is poor, transmission time may be increased
when ECM is enabled.
Send From Memory This determines how to transmit the document manually. If it is on, the machine will scan documents
into memory and then send a fax. If it is off, the machine will first dial and send.
b,d You can see the number of the person calling you. Before using the
Caller ID
must be installed on your telephone line by the telephone company. For more information, see "Using
Caller ID" on page 6.2.
b,d You can use the short message service. Before using the Short Message service, it must be installed on
Short Message
your telephone line by the telephone company. For more information, see "Using Short Message
Service (SMS)" on page 6.6.
Set Junk Fax No. You can prohibit your machine from uncertified or unwanted junk faxes like spam mail. To add a
number as a junk fax you should have at least one Caller ID detected by the machine. Even though you
have added junk fax numbers, if you turned off the Caller ID option above, the Junk Fax protection will
be removed. For more information, see "Registering/deleting the junk fax numbers" on page 6.5.
A journal report shows the specific information concerning transmission or reception activities, the time
Auto Journal
and date of most recent 40 transmissions or receptions.
c DRPD (Distinctive ring) is a service provided by some telephone companies that assigns two phone
DRPD Mode
numbers to one phone line, each of which makes your phone ring differently. If you subscribe to this
service, you can program your machine to learn one phone number and distinctive ring for incoming
faxes.
As the display shows, call this fax from other fax machine. The machine will learn the ring pattern and
displays
mode.
This lets the service center check the status of your machine to find out if there is anything wrong.
Remote Test
Resolution Sets the default resolution when copying and faxing.
6.10
to print a confirmation report automatically each time you send a fax. Choose
ON
in millimeter.
Discard Size
when finished. Now, you can use the
DRPD OK
Suboption
to print only when an error occurs, and the
ERROR
Caller ID
Rcv.Mode/Darkness
Left/right
OFF
feature, Caller ID service
to select DRPD receiving