Advertisement
4.
Insert the bottom of the windshield assembly into the middle windshield support.
5.
Secure the windshield to the front canopy frame tubes using the 4 hex-socket flange head bolts (M6 x 55
mm), 4 spacers, and 4 locknuts (M6) as shown in
Torque the hex-socket flange head bolts (M6 x 55 mm) to 9 N∙m (80 in-lb).
6.
Install the hood.
Operation
Transporting a Machine
with the Windshield
Installed
When transporting a machine with the folded
windshield installed, ensure that you follow these
recommendations:
•
The machine is facing forward during
transportation.
•
The folding windshield is secured in the down
position using the rubber clamps.
•
Do not exceed a vehicle speed of 96 km/h (60
mph).
Figure
3.
Figure 3
Maintenance
Cleaning the Windshield
1.
Rinse the windshield with lukewarm water.
2.
Using a soft cloth or sponge, wash the
windshield with mild-detergent soap to clear the
dirt and grime.
Important:
Do not scrub the windshield with
a brush or rough fiber.
3.
Rinse the windshield with lukewarm water.
4.
Dry the windshield using a soft, microfiber cloth
to prevent water spots.
4
g384990
Advertisement
