Tire Pressure Monitoring (warning) System
(TPMS)
The tire pressure warning system can be selected on "
Display (MID).
System reset initialization
(1) Press "
" switches and select "
(2) Press "
" switches and select "
"
."
(3) Press "
" switches and select "TPWS" and then press "
(4) Press "
" switches and select "Set Pressure" then press and hold "
Message will be displayed on the MID and the warning light will blink 3 times.
The tire pressure detected by the tire pressure warning system can be displayed
on the Multi-Information Display (MID).
If the tire pressure indicator flashes for 1 minute and then remains on, take the
vehicle to your local Toyota dealer.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
" of the Multi-Information
" from the Multi-Information Display (MID).
(Vehicle Settings)," then press and hold
61
."
."