TOYOTA SAFETY SENSE
Road Sign Assist (RSA)
Using an intelligent camera, Road Sign Assist (RSA) is designed to detect speed
limit signs, stop signs, do not enter signs and yield signs, and display them on the
Multi-Information Display (MID).*
* All vehicle actions must be driver-initiated and are not automated.
Refer to the Toyota Owner's Manual for additional information and limitations.
RSA DISPLAY
When the driving support system
information display is selected, a
maximum of 3 signs can be displayed.
SUPPORTED TYPES OF ROAD SIGNS
Speed limit
Do Not Enter
SYSTEM ON/OFF
(1) Press "
" switches and select "
(2) Press "
" switches and select "
or off.
Note: If the vehicle was last turned off while a speed limit sign was displayed
on the Multi-Information Display (MID), the same sign displays again when the
vehicle is turned on.
Refer to the Toyota Owner's Manual for additional information on RSA operation,
settings adjustments, limitations, and precautions before attempting to use it.
™
When a tab other than the driving
support system information display is
selected, the following types of road signs
will be displayed.
• Speed limit sign
• Do Not Enter sign (when notification
is necessary)
Stop
Yield
" from the Multi-Information Display (MID).
RSA" and then press "
58
" to turn RSA on