Toyota RAV4 2022 Quick Reference Manual page 49

CHANGING PRE-COLLISION ALERT TIMING
(1) Press " " switches and select "
(2) Press " " switches and select "
setting screen is displayed.
(3) Press " " switches and select "Sensitivity" and then press "
the desired setting. Each time it is pressed, the PCS alert timing changes as
shown above.
(4) Press " " to go back to the menu.
Note: PCS is enabled each time the vehicle is turned on. The system can be
disabled/enabled and the alert timing of the system can be changed. (Alert
timing only, brake operation remains the same.)
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press " " switches and select "
(2) Press " " switches and select "
on or off.
Note: The system is enabled each time the vehicle is turned on.
Refer to the Toyota Owner's Manual for additional information on PCS w/PD
operation, settings adjustments, limitations, and precautions before attempting to
use it.
Middle
Far
(default)
" from the Multi-Information Display (MID).
PCS" and then press and hold "
" from the Multi-Information Display (MID).
PCS" and then press "
47
Near
." The
" to change
" to turn PCS