Recording The Amount Of Remaining Media; Displaying The Amount Of Remaining Media On The Screen - Roland SJ-645EX User Manual

4-8 Recording the Amount of Remaining Media

Displaying the Amount of Remaining Media on the Screen

You can display how much of the media in use is left.
Once you set the amount of media remaining, the amount remaining is displayed at the top menu until it reaches zero. If
you cancel the setup such as by removing the media or raising the loading lever, the amount remaining at that time flashes
on the screen.
* The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
The amount of media remaining is not updated automatically when you change the media. Redo the setting whenever you
change the media.
Press the [MENU] key, and press the [
1
to make the following screen appear on the dis-
play.
Press the [
2
appear on the display.
Press the [
3
appear on the display.
Press the [
4
appear on the display.
Use the [ ] and [ ] keys to set the amount of
media remaining, then press the [ENTER] key.
Press the [MENU] key, then the [
5
back to the original menu screen.
The amount of media remaining that you set is
displayed.
You can also make this menu appear automatically when you change the media. In addition, you can print the amount of media
remaining for later reference. For more information, go to "6-2 Description of Menus" and refer to "SHEET REMAIN."
Chapter 4: A Wide Variety of Operations
68
] key to make the following screen
] key to make the following screen
] key to make the following screen
] key to go
] key
MENU
SHEET REMAIN
SHEET REMAIN
PRINT MEMO
SHEET REMAIN
SET LENGTH
SET LENGTH
0.0 m
W1234mm
20.0 m
L20.0m SETUP SHEET
or
L20.0m