Brother GTX600NB Setup Manual page 5

CAUTION
Printing
When the pretreatment is applied to printed
objects (like a T-shirt) with a spray or pretreatment
applicator, sprayed mist is generated. So wear a
pair of plastic gloves, a mask and protective
glasses (or goggles) designed to shield against
liquid splash, and fully take care of the air
ventilation when you are working with it.
When a problem occurs with the operation of the
printer, contact the place of purchase or a qualified
technician.
Be careful not to put your hands in the clearance
of the cover of the lifting up/down mechanism.
Doing so may cause injury.
Maintenance
Be careful not to pinch your fingers when closing
each cover. You may get injured if you pinch your
fingers.
When you mount or replace the head, be careful
not to get your hands or fingers caught. Otherwise
you may be injured.
Do not drink liquids such as the ink, maintenance
solution, cleaning solution, pretreatment, or waste.
They may cause diarrhea or vomiting.
When handling liquids such as the ink,
maintenance solution, cleaning solution,
pretreatment or waste, be sure to wear protective
glasses and gloves so that it does not get into your
eyes or onto your skin.
It may cause inflammation. In case of contact with
eyes, do not rub but immediately rinse the eyes
with water.
Keep the liquids out of the reach of children.
Be sure to wear protective goggles and gloves
when handling the grease, so that it does not get
into your eyes or onto your skin.
It can cause inflammation. Do not drink or eat the
grease. It may cause diarrhea or vomiting.
Keep the liquids out of the reach of children.
When replacing parts and installing optional
accessories, be sure to use only genuine Brother
parts. Brother will not be held responsible for any
accidents or problems resulting from the use of
non-genuine parts.
When replacing parts or installing optional
accessories, be sure to follow the procedures
described in the Instruction Manual. Incorrect
procedures could cause injuries or problems.
Follow the corresponding instructions in the
manual when you put your hands inside the cover
during regular maintenance while the power is
turned on.
iv