Brother GTX600NB Setup Manual page 32

Setup of the printer
3.
Hold the latch of the wiper on the left-hand side and insert the
wiper into the maintenance unit from the right-hand side.
Be sure to connect the wiper in the right
direction.
IMPORTANT
Push the wiper in and make sure that the left
and right protrusions are firmly fitted.
There may be some ink marks from the finished
product inspection.
TIPS
23
Right-hand-
side cover
Left-hand-
side cover
X1052
9
Mounting the flushing foam
Mount the flushing foam onto the maintenance unit.
After this assembly process is completed, make
sure that no flushing foam extends off the
outboard end portions of the maintenance unit.
IMPORTANT
If it sticks out of the end portions, it may interfere
with any nozzles and may result in non-ejection
of ink-jet droplets.