Brother GTX600NB Setup Manual page 18

Setup of the printer
6.
Align the bands provided for the tank caps so that the bands
face the front. Then lift and slide the main tank cover in the
direction of ① until the main tank cover passes over the tank
caps.
IMPORTANT Be careful not to pinch the tubes.
7.
Insert the notch on the main tank cover into the metal fitting
loosened in step 3.
9
8.
a
Insert the main tank cover firmly to direction ② and securely
tighten the two main tank cover installation screws (M4) that
have been temporarily tightened and the four loosened screws.
9.
Fit the hole caps (black) into the two screw holes on the main
tank cover.
s