Brother GTX600NB Setup Manual page 19

Print switch
Install the print switches on the proper side. The
side with the hole faces the platen side to allow
IMPORTANT
the wire harness to passed through it.
1.
Check the left and right sides.
2.
Pass the harness of the printer through the hole.
3.
Print switch unit installation screw
Secure the print switch unit with the four print switch unit
installation screws from the bottom of the main unit.
(Torque: 2.0 N・m)
Do not pinch the harness with the frame and the
IMPORTANT
print switch unit.
10