Brother GTX600NB Setup Manual page 35

11
Configuring the language
Perform the operation while the printer is in Standby mode.
1) -> [Language] -> Select your language ->
2) Press the power button to turn off the power.
12
Installing the ink
Turn ON the power of the printer and perform the operation
while the printer is in Standby mode.
1) -> [Maintenance] -> [Initial Ink Installation] -> [All
Print Heads]
2) Follow the precautions on the screen and press
(it takes about 120 minutes and further takes about 30
minutes if below 18°C (64.4°F)).
3) When the printer returns to Standby mode, the operation will
be completed.
26