Touchscreen Controls For A Connected Computer - Garmin GPSMAP 8X10 Installation Instructions Manual

Touchscreen Controls for a Connected Computer

To prevent corrosion due to moisture, you must use Garmin GPSMAP accessory cables when connecting the
chartplotter to the computer. Using different cables voids your warranty.
You can connect the chartplotter to a computer to see the computer screen on the chartplotter touchscreen and
control the computer using the chartplotter touchscreen. To see the computer screen, you must connect the
computer to the HDMI IN port. To control the computer, you must connect the computer to the USB port.
The Garmin HDMI accessory cable (010-12390-20) is 4.5 m (15 ft) long. If you need a longer cable, you should
use an active HDMI cable only. You need an HDMI coupler to connect the two HDMI cables.
The Garmin USB accessory cable (010-12390-10) is 4.5 m (15 ft) long. If you need a longer cable, you should
use a USB hub or USB repeater extension cable only.
You must make all cable connections in a dry environment.
Devices
Item
Connections
From
Computer's HDMI OUT port
Chartplotter's USB port
16
Device
Computer
GPSMAP chartplotter
To
Chartplotter's HDMI IN port
Computer's USB port
NOTICE
Cable
Garmin HDMI Cable
Garmin USB Cable